Epson DiscProducer PP-100N User Manual

149
Troubleshooting
Internal drive
error (DR1/2)
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact
Customer Support.
Internal printer
error
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact
Customer Support.
Invalid
state error
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact
Customer Support.
No disc
ST1,ST2
Load discs into the input stacker (Stacker 1 or Stacker 2).
No ink cartridge
(C,LC,LM,M,Y,K)
The ink cartridge of the displayed color is not installed, or is
not installed correctly.
Correctly install the cartridge of the displayed color.
(See “Changing the ink cartridge” on page 125 in this
guide.)
No stacker
ST1,ST2,ST3
Load the displayed stacker, and close the disc cover. (See
“Handling stackers” on page 21 in this guide.)
Non-standard ink
Continue?
To use the ink cartridge, press the button (Yes). To
change to a Epson brand ink cartridge, press the CANCEL
button (No), and change the ink cartridge.
Use of non-Epson brand ink cartridges is not recommended.
• Use of non-Epson brand ink cartridges can result in
problems that will not be covered by the warranty.
• Epson cannot guarantee the quality and reliability of non-
Epson brand products. Repairs for any damage or
breakdown of this product due to the use of non-Epson
brand products will not be free of charge even if the
warranty period is still valid.
• This product performs color adjustment based on use of
Epson brand ink cartridges. Use of non-Epson brand ink
products can adversely affect the printing quality and
prevent the product from realizing its maximum
performance.
See “Changing the ink cartridge” on page 125 in this guide
for the ink cartridge changing procedure.
Print tray
open/close error
-When the printer tray does not come out-
See “Printer Tray Does Not Come Out” in the PP-100N
Administrator’s Guide.
-When the printer tray does not close-
Remove any remaining discs, turn off the power, and then
turn on the power again.
If the same error message still appears, repair is required.
Please contact Customer Support.
Error Message Remedy
Notification
Sound

Epson DiscProducer PP-100N Specifications

General

Capacity	50 discs
Interface	Ethernet
Product color	Black, Grey
Printing colors	Black, Cyan, Light cyan, Light magenta, Magenta, Yellow
Country of origin	China
Quantity per pack	1 pc(s)
Media types supported	CD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Optical disc diameter	120 mm
Publishing speed (CD)	30 discs/hour
Publishing speed (DVD)	17 discs/hour
Number of CD/DVD drives	2
Compatible operating systems	Windows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP
Print speed (speed mode)	60 discs/hour
Print speed (quality mode)	42 discs/hour
Print resolution (speed mode)	1440 x 1440 DPI
Print resolution (quality mode)	1440 x 720 DPI
CD write speed	40 x
DVD-R write speed	12 x
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Pallet width	800 mm
Pallet height	1011 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	6 pc(s)
Quantity per pallet layer	2 pc(s)

Weight and Dimensions

Package depth	725 mm
Package height	525 mm
Package weight	29200 g
Dimensions (WxDxH)	730 x 530 x 522 mm