EasyManuals Logo

Epson DiscProducer PP-100N User Manual

Epson DiscProducer PP-100N
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Before Using This Product
WARNING
Do not use flammable gas sprays inside or around this product. There is a
risk that gas will build up and a spark may cause a fire.
Do not install in a place where volatile substances, such as alcohol or paint
thinner, are present or in a place where there is fire.
This may result in electric shock or fire.
CAUTION
Place the product on a flat, stable surface that extends beyond the base of the
product in all directions. If you place the product by the wall, leave more than
10 cm between the back of the product and the wall. The product will not
operate properly if it is tilted at an angle.
Do not install or store in an unstable place (such as on a wobbly or tilted
surface), in reach of children, or in a place subject to vibration from other
machines.
There is a risk that it could drop or fall over, resulting in injury.
Do not install in places where there is excessive moisture or dust, risk of getting
wet, direct sunlight, severe changes in temperature and humidity, or close to
heating and cooling devices.
There is a risk of electric shock, fire, and malfunction or failure of this product.
Do not block the air vents on this product.
Blocking the air vents may result in internal heat build-up and fire.
Do not install in the following types of places.
Tight spaces where ventilation is poor, such as in a closet or on a bookshelf
On a rug or bed
If you place the product by the wall, leave more than 10 cm between the
back of the product and the wall. It is also necessary to leave enough space
in front of the product to open and close the disc cover.

Table of Contents

Other manuals for Epson DiscProducer PP-100N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson DiscProducer PP-100N and is the answer not in the manual?

Epson DiscProducer PP-100N Specifications

General IconGeneral
Capacity50 discs
InterfaceEthernet
Product colorBlack, Grey
Printing colorsBlack, Cyan, Light cyan, Light magenta, Magenta, Yellow
Country of originChina
Quantity per pack1 pc(s)
Media types supportedCD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Optical disc diameter120 mm
Publishing speed (CD)30 discs/hour
Publishing speed (DVD)17 discs/hour
Number of CD/DVD drives2
Compatible operating systemsWindows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP
Print speed (speed mode)60 discs/hour
Print speed (quality mode)42 discs/hour
Print resolution (speed mode)1440 x 1440 DPI
Print resolution (quality mode)1440 x 720 DPI
CD write speed40 x
DVD-R write speed12 x
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Pallet width800 mm
Pallet height1011 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet6 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth725 mm
Package height525 mm
Package weight29200 g
Dimensions (WxDxH)730 x 530 x 522 mm

Related product manuals