84
3
Insert the stacker, and close the disc cover.
• Do not load discs above the red line on the stacker. The product may malfunction, or
the discs may be damaged.
• Make sure that the bottom of the stacker is not dirty before loading the discs.
• For Batch Mode and when Stacker 3 is set as the output stacker for External Output
Mode, make sure that no discs are loaded in Stacker 3 and Stacker 4. Also, set the lock
lever to the [LOCK] position, and do not pull out Stacker 4.
• Stacker 3 is not used in Standard Mode and when Stacker 4 is set as the output stacker
for External Output Mode. Remove Stacker 3.
To Next Page
Loading...
