3. Press the
Operate
button to turn on the printer, if necessary.
4. Slide the left edge guide to the triangle mark on the front paper
or front sheet guide. Then adjust the right edge guide to match
the width of your paper.
Note:
You can slide the left edge guide to the left in 1/10-inch increments
to increase the left margin on your printout.
5. Load the paper printable side up between the edge guides until
it meets resistance. The printer loads the paper automatically.
front sheet guide
5
10
15
G4-19-1
G4-19-2
L
Gentian Rev.c
A5 size Chapter 4
97/06/20 pass 0
4-20
Printing on Single Sheets
To Next Page
Loading...
