Epson FX 880 - Removing Continuous Paper with Labels

Removing continuous paper with labels
To avoid peeling labels off the backing sheet and jamming the
printer, follow the steps below when you remove continuous
paper with labels from the printer.
1. Tear off the fresh supply of continuous labels at the perforation
nearest the paper entry slot.
2. Hold down the
LF/FF
button to eject the remaining labels from
the printer.
c
Caution:
Never feed labels backward using the
Load/Eject
or
Tear
Off/Bin
button. Labels can easily come off the backing sheet and
cause a paper jam.
g3-19
3
R
Gentian Rev.c
A5 size Chapter 3
97/07/04 pass 2
Printing on Continuous Paper
3-5