For DOS Program Users
Installing the printer driver
To install a printer driver in most DOS applications, you
should select the printer you are using during the installation
or setup procedure.
Choose the EPSON FX-880 printer at the appropriate step in
the procedure. If the list in your application does not include
the FX-880 printer, choose the first available printer from this
list:
FX-850
FX-800
FX-85
FX-80+
FX-80
If none of these printers is listed, choose the first one available
from the following:
FX
LX
RX
MX
EPSON printer
Standard printer
Draft printer
ASCII printer
Note:
If your application does not list a suitable alternative, contact the
software manufacturer to see if an update is available.
2
R
Gentian Rev.c
A5 size Chapter 2
06/20/97 pass 2
Setting Up Your Software
2-19
To Next Page
Loading...
