You can also load single-sheet paper using an optional
cut-sheet feeder, front sheet guide, or front paper guide. For
information on single sheets, see Chapter 4.
Options and Consumable Products
Options
The following options are available to enhance your printer’s
paper handling and interface capabilities:
Single-bin cut-sheet feeder (C80637
✽
)
This economical cut-sheet feeder automatically feeds up to 50
sheets of paper into your printer without reloading. Also you
can use the paper guide to manually load single sheets or
envelopes without removing the cut-sheet feeder.
High-capacity cut-sheet feeder (C80638
✽
)
This cut-sheet feeder automatically feeds up to 150 sheets of
paper or 25 plain bond envelopes into your printer without
reloading. You can also create a double-bin cut-sheet feeder by
connecting this feeder to the single-bin feeder.
Additional tractor unit (C80020
✽
)
This option is available because using two tractors in
combination improves continuous paper handling and reduces
the chances of paper jams. This printing method is especially
useful for printing on continuous multi-part forms or labels.
Also, if you have two tractors, you can load two types of
continuous paper at the same time and easily switch between
them.
Roll paper holder (#8310)
This option allows you to use the many types of 8.5-inch wide
roll paper sold for telexes and similar machines.
L
Gentian Rev.c
A5 size Introduction
97/07/04 pass 1
6
Getting to Know Your Printer
To Next Page
Loading...
