Installing the printer driver using My Computer
1. Make sure Windows 95 is running and the printer is off.
2. Insert Disk 1 of your printer driver software in a disk drive.
Double-click the
My Computer
icon, and then double-click
the drive in which you inserted the disk.
3. Double-click the
Setup.exe
icon, then select your printer icon
in the EPSON Printer Driver Setup dialog box shown below.
Click
OK
and follow the on-screen instructions.
After you install your printer driver for Windows 95, you can
install the EPSON Status Monitor 2 utility program.
Installing the printer driver using plug-and-play
Note:
You can install the printer driver using plug-and-play only if your
computer has an IEEE-1284 compatible, bidirectional parallel port. See
your computer documentation for more information.
1. Make sure the printer is connected to your computer as
described on page 1-11.
2. Turn off your printer and computer, if necessary.
3. First turn on your printer and then turn on the computer.
Your computer starts loading Windows 95.
setup1
2
R
Gentian Rev.c
A5 size Chapter 2
06/20/97 pass 2
Setting Up Your Software
2-3
To Next Page
Loading...
