International character sets
You can select one of the following international character sets by sending
the ESC R command. For example, when you select “Italic France,” the
characters in the “France” row in the table below are used in the italic
character table.
The following eight international character sets can be selected using the
default-setting mode or the ESC R command.
The following seven additional sets can be selected only with the ESC R
command.
A-31
A-32
B
R
Gentian Rev.c
A5 size Appendix B
97/06/17 pass 3
Specifications
B-25
To Next Page
Loading...
