rear slot (available for use with the push or pull tractor)
c
Caution:
Do not load continuous paper with labels from the rear slot. Labels
require a straight paper path; otherwise the labels may come off their
backing paper inside the printer and cause a paper jam.
Note:
Thick paper, such as multi-part forms with five or six parts, requires a
straight paper path to avoid paper jams. Load thick paper in the front slot
as described in Chapter 3.
For information on loading paper from the rear slot, see “Using
the Tractor in the Rear Push Position” or “Using the Tractor in
the Pull Position” in Chapter 3.
Printing on single sheets
As shown below, you can load ordinary single sheets (not
single-sheet multi-part forms) and envelopes one at a time
from the top of the printer, using the paper guide that comes
with the printer.
g2-8-1
g03
R
Gentian Rev.c
A5 size Introduction
97/07/04 pass 1
Getting to Know Your Printer
5
To Next Page
Loading...
