4. If you use a password, enter it at the prompt. The New
Hardware Found screen appears and displays your printer’s
model name.
Note:
If you do not see the New Hardware Found screen, or if you run into
any other problem, click
Cancel
and follow the instructions under
“Installing the printer driver using My Computer” on page 2-3.
5. Click the
Driver from disk provided by hardware
manufacturer
radio button.
Note:
Windows 95 may display the New Hardware Found screen again the
next time you turn on your computer. If this happens, select the
Do
not install a driver
radio button and then click
OK
. This screen
will not appear again.
6. Click
OK
. You see the Install From Disk screen.
7. Insert Disk 1 of your printer driver software in a disk drive.
8. If you inserted the disk in drive A, type
A:\Win95
in the Copy
manufacturer’s files from box and click
OK
. If you inserted the
disk in a drive other than drive A, replace the letter
A
with the
appropriate letter, and then click
OK
.
9. You can type a unique name for the printer in the Printer name
box in the Add Printer Wizard dialog box. However we
recommend that you keep the default model name as shown.
If this is your only printer or you want to use this printer as the
default printer for Windows 95 applications, select
Yes
. (
No
is
the default setting.)
10. Click the
Finish
button. The program copies the files to your
hard disk and adds an icon to the Printers folder using the
printer model name or the name you selected.
After you install your printer driver for Windows 95, you can
install the EPSON Status Monitor 2 utility program.
L
Gentian Rev.c
A5 size Chapter 2
06/20/97 pass 2
2-4
Setting Up Your Software
To Next Page
Loading...
