❑
Use the
paper release lever
to change the paper path
without removing the paper.
Using the paper release lever, you can easily switch to printing on
single sheets without removing the continuous paper loaded
in the printer. You can switch to single-sheet printing this way
whenever the tractor unit is installed in the front or the rear
push position. For more information, see Chapter 3.
❑
Use the
micro adjust feature
to adjust the top-of-form and
tear-off positions.
The micro adjust feature allows you to move the paper forward
or backward in 1/216-inch increments so that you can make
precise adjustments to the top-of-form and tear-off positions.
For more information, see Chapter 3.
g02-2
L
Gentian Rev.c
A5 size Introduction
97/07/04 pass 1
2
Getting to Know Your Printer
To Next Page
Loading...
