The top margin or
top-of-form position setting
is incorrect.
Check and adjust the margin or
top-of-form position settings in your
application software. See the printable
area specifications in Appendix B.
Adjust the top-of-form position in
micro adjust mode. However, settings
made in Windows applications
override settings made in micro adjust
mode. See “Adjusting the Top-of-Form
Position” in Chapter 3.
The printer you want to use is
not selected in your software.
Choose the correct printer from the
Windows desktop or in your
application before printing.
You moved the paper using
the knob while the printer
was on.
Adjust the top-of-form position using
the micro adjust feature. See
“Adjusting the Top-of-Form Position”
in Chapter 3.
c
Caution:
Never use the knob to adjust the top-of-form position; you may damage
the printer or lose the top-of-form position.
8
Troubleshooting
R
Gentian Rev.c
A5 size Chapter 8
97/06/20 pass 1
Troubleshooting
8-7
To Next Page
Loading...
