6. If a used ribbon cartridge is installed, grasp the cartridge by its
handle and pull it up and out of the printer.
7. Remove the new ribbon cartridge from the package and turn the
ribbon-tightening knob in the direction of the arrow to remove
any slack in the ribbon.
8. Hold the ribbon cartridge by its handle and push it firmly down
into position; then press down on both ends of the cartridge to
fit the plastic hooks into the slots.
handle
1-7-a
g1-7-1
g1-7-2
1
R
Gentian Rev.c
A5 size Chapter 1
97/06/18 pass 2
Setting Up the Printer
1-7
To Next Page
Loading...
