7. Fit the four holes of the paper over the pins. Then close the
sprocket covers.
8. Slide the right sprocket to remove any slack in the paper, then
lock it in place by pushing the sprocket lock backward.
9. Open the edge guides all the way to the left and right, then raise
the continuous paper support.
Load paper in the bottom
slot printable side up.
G3-19-2
G3-19-4
!g3-26-1
L
Gentian Rev.c
A5 size Chapter 3
97/07/04 pass 2
3-24
Printing on Continuous Paper
To Next Page
Loading...
