Epson LX-300+ Service Manual

LX-300+/1170 Revision C
PRODUCT DESCRIPTION
O
peration 30
3. Fix the selected number by pressing Tear Off switch.
Selected number is fixed and the next alignment pattern is printed.
4. Repeat step 2 to 3 until finishing Bi-d adjustment for NLQ mode.
Following adjustment is executed.
- Bi-d. adjustment for high speed draft mode
- Bi-d. adjustment for draft mode
- Bi-d. adjustment for NLQ mode
5. Turn the printer off.
The setting is stored into non-volatile memory.
1.4.3 Errors
o Paper out error:
When the printer fails to feed a sheet, it goes a paper out error.
o Release lever error:
When release lever position is wrong, it goes a release lever error.
o Fatal errors:
Carriage control error and Power supply voltage error.

Epson LX-300+ Specifications

General

Emulation	Epson ESC/P, IBM PPDS
Print Method	9-pin, impact dot matrix
Interface	Parallel
Paper Handling	Friction feed
Dimensions	366 x 275 x 159 mm
Paper Width	4 - 10 inches