Displays the operation mode, radio wave
status, and connection status for the wire-
less LAN.
The icon is not displayed when the wireless
LAN is disconnected.
The number of lines indicates the radio wave
strength.
Strong
Weak
Searching or unavailable
The icon changes as shown below depend-
ing on the operation mode.
Infrastructure mode
Ad hoc mode
Wi-Fi Direct mode
Simple AP mode
Note:
While trying to connect to wired or wireless LAN, the
following icon is displayed instead of the wired or wireless
LAN icon.
B (Load Guide/Media Setup) button
Load Guide is displayed when paper is not loaded.
You can continue by checking the selected Load
Guide procedure on the screen.
Media Setup is displayed when paper is loaded. You
can set the Media Size and Media Type.
C (Ink Remaining Display) button
Displays the approximate amount of ink remaining
and free space in the maintenance cartridge.
Depending on the status of each cartridge, the icons
change as shown below.
Ink cartridge
No error. The level of the indicator changes
depending on the amount of ink remaining
in the cartridge.
Ink is low. You need to prepare a new ink
cartridge. We recommend replacing the ink
cartridge as soon as possible because the
ink may be expended while printing.
Note:
The ink remaining icon is displayed while printing or
replacing ink, as well as when an ink cartridge error has
occurred.
indicates the ink that needs to be
replaced or for which an error has occurred.
Ink color codes
MK Matte Black
SC-P800 Series User’s Guide
Introduction
14
To Next Page
Loading...
Need help?
General
