System Administration
* indicates the default setting.
Item Parameter Content
Printer Settings Paper Source
Settings
Paper Setup
Display
On* Automatically displays the media setup
screen when paper is loaded.
When this is Off, AirPrint is unavailable. Also,
Error Notice from Paper Source Settings
becomes Off.
Off
Error Notice On Set whether or not to display an error if the
paper size or type differ from the printer
settings.
Off*
Paper Skew Check On* This option only takes effect with fine art
media and poster board.
Select On to display an error in the control
panel’s screen when the paper is fed in at a
slant.
On is recommended, as feeding the paper at
a slant can cause the paper to jam.
Off
Horizontal
Centered
On*
When this is set to On, even if the print
position moves on the loaded paper due to a
cutting error or paper feed error, the printer
detects the width of the paper and the image
is adjusted and printed in the center. Even if
there is a paper cutting error or print position
error, the margins are still set evenly on the
left and right.
Off
Print Page Line On*
When this is set to On, a dotted line is printed
on the roll paper.
Off
Paper Size Check On* Select whether or not (On/Off) to detect the
paper width. When this is set to Off, printing
may be performed beyond the edges of the
paper. If printing is performed beyond the
edges of the paper, the inside of the printer
will be soiled with ink. We recommend
setting this to On.
Off
BK Ink Auto
Change
On*
When this is set to On, the black ink is
changed automatically using the Media
Type selected in the printer driver.
U “Changing the Type of Black Ink” on
page 41
U “Supported Media” on page 118
Off
SC-P800 Series User’s Guide
Using the Control Panel
95
To Next Page
Loading...
Need help?
General
