104
Important Safety Instructions
Before using your Epson Stylus CX, read and follow these safety instructions:
■ Be sure to follow all warnings and instructions marked on the Epson Stylus CX.
■ Use only the type of power source indicated on the Epson Stylus CX label.
■ Use only the power cord that comes with the Epson Stylus CX. Use of another
cord may cause fires or shock. Do not use the cord with any other equipment.
■ Place the Epson Stylus CX near a wall outlet where the plug can be easily
unplugged.
■ Do not let the power cord become damaged or frayed.
■ If you use an extension cord with the Epson Stylus CX, make sure the total
ampere rating of the devices plugged into the extension cord does not exceed the
cord’s ampere rating. Also, make sure the total ampere rating of all devices
plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■ Leave enough room around the Epson Stylus CX for sufficient ventilation. Do
not block or cover openings in the Epson Stylus CX case or insert objects through
the slots.
■ Do not place the Epson Stylus CX near a radiator or heating vent or in direct
sunlight.
■ Place the Epson Stylus CX on a flat, stable surface that extends beyond its base in
all directions. It will not operate properly if it is tilted or at an angle.
■ Make sure the back of the Epson Stylus CX is at least 10 cm (3.9 in.) away from
the wall.
Bit rate 12 Mbps (Full speed device)
Data encoding NRZI
Adaptable connector USB Series B
Recommended cable
length
Under 2 meters
To Next Page
Loading...
Need help?
General
