82
■ Try using a higher quality paper or select a higher Quality Option or Print
Quality setting. See Printing in Windows.
■ Select Photo RPM for Quality Type. Remember that this setting increases print
time.
■ The print head may need to be aligned. See Aligning the Print Head.
■ You may need to increase the image resolution or print it in a smaller size; see
your software documentation.
Scan Quality Problems
You see only a few dots in your scanned image.
■ Make sure the document is placed on the document table with the side to be
scanned facing down. See Placing Originals for Scanning for details.
■ When scanning with the Black&White setting in Home or Professional Mode,
change the Threshold setting. See Adjusting the Color and Other Image Settings
for instructions.
A line of dots always appears in your scanned images.
The document table may be dusty or scratched. Clean the document table as
described in Cleaning the Epson Stylus CX.
Straight lines in your image come out crooked.
Make sure the document lies perfectly straight on the document table.
Your image is distorted or blurred.
■ Make sure the document lies flat on the document table. Also make sure your
document is not wrinkled or warped.
■ Make sure you do not move the document or the Epson Stylus CX while
scanning.
■ Make sure the Epson Stylus CX is placed on a flat, stable surface.
■ Select Unsharp Mask Filter in Epson Scan’s Professional Mode window. See
Adjusting the Color and Other Image Settings
for instructions.
To Next Page
Loading...
Need help?
General
