72
4. If the outer case or inside of the sheet feeder is dirty, clean it with a soft cloth
dampened with mild detergent. Keep the scanner section closed to prevent water
from getting inside.
5. If ink accidentally gets inside the printer, wipe it off with a damp cloth.
Warning: Don’t touch the gears or any other parts inside the Epson Stylus CX.
Caution: Never use a hard or abrasive brush, or benzine, alcohol, or paint thinner
for cleaning; they can damage the Epson Stylus CX components and case.
Don’t get water on the Epson Stylus CX components and don’t spray lubricants
or oils inside the Epson Stylus CX.
Transporting the Epson Stylus CX
If you need to ship your Epson Stylus CX, you must prepare it for transportation by
packing it in its original box or one of a similar size.
1. Turn off the Epson Stylus CX.
2. Remove any paper from the sheet feeder and close the paper support.
3. Unplug the power cord from the electrical outlet and disconnect the power cord
from the Epson Stylus CX. Then disconnect the USB cable from the Epson Stylus
CX.
4. Open the scanner section and make sure the ink cartridge holder is in the home
position on the right.
Clean here
To Next Page
Loading...
Need help?
General
