51
Type a name for your custom size, enter the size, click the Save button, then
click OK. Your new size appears in the Target Size list.
3. In Professional Mode, you can fine-tune the size using additional tools. Click the
+ next to Target Size to display these tools:
■ To size your image by a certain percentage, adjust the Scale value.
■ To change the way your image is cropped, turn Trimming on or off. (See
Epson Scan Help for details.)
■ To unlock the proportions of your scan size, click the lock icon. Then
adjust the marquee or enter new width/height measurements.
4. Once you have selected your scan size, you can click and drag the marquee to the
area in the image you want to scan. For details, see Adjusting the Scan Area
(Marquee). The marquee proportions are retained as you adjust it.
If you need to rotate the marquee for a landscape or portrait image, click the
orientation icon. (Not available if you are scanning at the Original Target
Size.)
Note: For more information about using the Target Size tools, click Help in
the Epson Scan window.
5. Now you are ready to scan your image(s). See Finishing the Scan for instructions.
Finishing the Scan
When you have finished selecting scan settings, you are ready to scan. Click the Scan
button. After a few moments, your images are scanned.
To Next Page
Loading...
Need help?
General
