26
Placing Originals for Scanning
Caution: Do not place heavy objects on the document table glass and do not
press the glass with too much force.
1. Open the document cover and place your original face-down on the glass, in the
upper left corner. Move your original about 1 mm (0.04 inch) away from the top
and left edges so all of it will be scanned.
2. Close the document cover gently so that your original does not move.
Caution: Never open the document cover beyond where it stops and do not
place heavy objects on top of the Epson Stylus CX.
To scan your document or photo, see Starting Epson Scan.
To Next Page
Loading...
