65
Caution: Leave the empty cartridge installed until you have obtained a
replacement, or the ink remaining in the print head nozzles may dry out. To
ensure good results, use genuine Epson ink cartridges and do not refill them.
Other products may cause damage to your Epson Stylus CX not covered by
Epson’s warranty.
1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is closed, then open the scanner.
Caution: Do not open the scanner when the document cover is open.
3. Press and release the ink button. The ink cartridge holder moves to the check
position and the On and ink lights flash. If one of the cartridges is low or
empty, the Epson Stylus CX moves that cartridge to the _ ink out mark.
Note: Don’t hold down the ink button for 3 or more seconds, or the printer
starts cleaning the print head.
Caution: Do not move the print head by hand; this may damage the Epson Stylus
CX. Always press the ink button to move it.
4. Press the ink button again.
To Next Page
Loading...
