Epson Stylus Photo RX700 - PE Sensor Assy

EPSON Stylus Photo RX900 Revision A
Disassembly and Assembly Disassembly and Assembly of Major Parts of Printer 122
4.4.16 PE Sensor Assy
1. Remove the Printer Mechanism. (p.107)
2. Disengage the hook, and slide the PE Sensor Assy upward and remove it.
Figure 4-62. Removing the PE Sensor Assy
After installing the PE Sensor Assy, route the lead wires as shown
below:
~ Rear ~
~ Front ~
Disengage the hook from the direction
of front, and slide it upward.
PE Sensor Assy