EPSON Stylus Photo RX700 Revision A
Troubleshooting Overview 57
3.1.5 Warning List
Table 3-2. Warning List
Causes Details Displayed Message (TBD) Release Conditions
CDR/DVD guide open
Displayed when the guide was open when printing started.
(at standalone printing)
The guide for CD/DVD print is opened. Close the guide.
The guide has been stored. Or, a
specified time has elapsed.
CDR/DVD guide closed
Displayed when the guide was closed when printing started.
(at standalone CD Label printing)
The guide for CD/DVD print is closed. Open the guide and press
start button.
The guide has been opened. Or, a
specified time has elapsed.
Waste liquid near end
Indicates the I/C waste liquid counter comes near end. This message is
displayed only when power is turned on.
Service required. Parts inside your printer are at near end of their
service life. See your printer’s documentation for details.
EEPROM has been initialized or
replaced. Displayed for a specified
time (approx. 7 seconds).
Elastomer tube replacement
The replacement time of the elastomer tube is near. This message is
displayed only when power is turned on.
Service required. Parts inside your printer are at near end of their
service life. See your printer’s documentation for details.
EEPROM has been initialized or
replaced. Displayed for a specified
time (approx. 7 seconds).
A part of the reference object is
broken (BT-MIME).
While XHTML-Print data could be decoded, a part or all of the reference
object had a MIME encode error and could not be obtained. The following
two problems are considered depending on the type of the un-obtained
reference object.
• For an image, an area where that image is to be printed becomes blank.
• For a CSS (style sheet) file, the background color, basic character size
or the like cannot be specified as intended at the send side.
Error in the data stream, the document cannot be printed very well. Press any key.
A part of the reference object cannot
be buffered (BT-MIME).
While XHTML-Print data could be decoded, a part of all of reference
object decoding was abandoned due to memory shortage or excess of the
max. number of objects to be handled.
Error in the data stream, the document cannot be printed very well. Press any key.
XHTML-Print document cannot be
decoded (BT-MIME).
XHMLT-Print document cannot be decoded due to a MIME encode error,
or XHML-Print is not contained.
Error in the data stream, the document cannot be printed. Press any key.
Unsupported media is inserted. Unformatted or unrecognizable media was inserted. Cannot recognize the memory card or disk.
Remove the card. Press the OK
button to delete the message.
BT File size error The document is too large to print with Bluetooth. Press any key.
BT designation error The document is too complex to print with Bluetooth. Press any key.
BT structure error Error in the data stream, the document cannot be printed. Press any key.
During extended copy The B&W button cannot be used. Press the Color button. Press “Color” key.
During extended copy The Color button cannot be used. Press the B&W button. Press “B&W” key.
P.I.F. list print P.I.F. data does not exist. P.I.F. data cannot be found.
Displayed for a specified time
(approx. 3 seconds).
Memory card print No image is contained in the memory card. Memory card or disk was not inserted or cannot be recognized.
Displayed for a specified time
(approx. 3 seconds).
Card insertion Recognition of the memory card failed. Cannot recognize the memory card or disk.
Displayed for a specified time
(approx. 3 seconds).
External device installment An unsupported device has been installed. Cannot recognize the device.
Displayed for a specified time
(approx. 3 seconds).
To Next Page
Loading...
