EPSON Stylus Photo RX700 Revision A
Maintenance Lubrication 151
6.3 Lubrication
6.3.1 Designated Lubricant
6.3.2 Lubrication Points
The types and amount of grease to be applied have been determined based on the
evaluation at factory. Accordingly, definitely use a suitable volume of designated
grease to the designated points for repair and maintenance of the product. Designated
types of grease and application points are as shown below.
Lubrication locations are as follows:
Table 6-6. Designated Lubricant
Type Name Parts Code Available
Grease
G-26 1080614
EPSON
G-45 1033657
G-65 1246432
G-70 1275684
G-71 1304682
G-72 1409258
G-74 1409257
C A U T I O N
Never use any grease other than those specified, since such
grease can affect adversely the mechanical life and functions of
this product or result in damage to this equipment.
As the suitable volume is also designated based on evaluation
result, avoid applying any undesignated volume.
Table 6-7. Lubrication Locations
Unit / Component (Reference Page for Disassembly/Assembly) Refer to
ASF Rear Assy p.152
Printer Mechanism Paper Guide Front Assy (Platen) (p.119) p.152
Release Assy (p.121) p.153
Driven Pulley Assy (p.115) p.154
Rear Paper Guide Assy (p.114) p.155
Carriage Assy (p.116) p.156
Idle Roller Shaft Assy (p.124) p.157
Rear Paper Guide (p.124) p.157
PF Roller Assy (p.126) p.158
CD-R Guide Assy (p.127) p.159
EJ Frame Assy (p.130) p.160
ASF Pick Up Shaft Assy (p.132) p.161
Scanner Unit CR Motor Unit (p.99) p.162
Driven Pulley Assy (p.99) p.162
To Next Page
Loading...
