EPSON Stylus Photo RX700 Revision A
Maintenance Lubrication 154
Lubrication of Driven Pulley Assy
Figure 6-6. Lubrication of the Driven Pulley Assy
Table 6-11. Lubrication of Driven Pulley Assy
Assy to be Lubricated
(Reference Page)
Lubrication Points/Amount of Application Type
Precautions
(Fig No.)
Driven Pulley Holder
Lubrication Points: Printer frame sliding surface
(x8)
Amount of Application: ø1x1mm (Use an injector)
G-26
Figure 6-6
Lubrication Points: Driven Pulley Shaft support
surface
Amount of Application :
G-26
Driven Pulley Roller
Lubrication Points: Holder sliding surface (both
sides)
Amount of Application : ø1x2mm (Use an injector)
G-26 Figure 6-6
Driven Pulley Shaft
Lubrication Points: 3 points
Amount of Application: ø1x2mm (Use an injector)
G-26 Figure 6-6
~Front~ ~Rear~