Epson Stylus Photo RX700 - Page 153

EPSON Stylus Photo RX700 Revision A
Maintenance Lubrication 153
 Lubrication of Release Assy
Figure 6-5. Lubrication of the Release Assy
Table 6-10. Lubrication of Release Assy
Assy to be Lubricated
(Reference Page)
Lubrication Points/Amount of Application Type
Precautions
(Fig No.)
Release Assy (p.121)
 Lubrication Points: Shaft sliding surface (x7)
 Amount of Application: ø1x2mm (Use an injector)
G-26
Figure 6-5
 Lubrication Points: Tray Sensor Lever contact area
(x2)
 Amount of Application: (Apply with a brush)
G-26
 Lubrication Points: Upper Paper Guide contact
area (x4)
 Amount of Application: ø1x4mm (Use an injector)
G-26
Sensor Lever
contact area
Sensor Lever shaft support
surface (x4)
Shaft support
surface (x7)
Upper Paper Guide
contact area (4)
Upper
Paper
Guide
Sensor Lever