Epson Stylus Photo RX700 - Starting the Adjustment Program

EPSON Stylus Photo RX700 Revision B
Adjustment Adjustments by Adjustment Program 141
RevisionB
5.3.2 Starting the Adjustment Program
Figure 5-12. Starting the Adjustment Program
Usually click [OK]
as “Auto select” is
chosen.
Usually click [OK]
as “Auto select” is
chosen.
Start the adjustment program for
Stylus Photo RX700
Sequential Adjustment Mode
Particular Adjustment Mode
On the screen, select “Replaced” or
“Removed” of each part that was
replaced or removed and press the
[OK] button.
C A U T I O N
In sequential mode, “Regularly Replaced Parts Maintenance
Counter” screen is displayed even when no maintenance parts
have been replaced.
This display is intended only for checking the counter value. Do
not press the [Initialize] button carelessly.