5-46 Disassembly, Assembly, and Adjustment Rev. A
Confidential
12. Insert the connectors you connected into the slit in the auto-cutter cover. Insert the cable
wires of the auto-cutter into the other slit in the auto-cutter cover.
13. While aligning the dowel, install the auto-cutter cover, and secure it with the screw. Arrange
the cable wires so that they come through the cut portion shown in the illustration.
Auto-cutter cover
The other slit
Slit
Cut portion
Auto-cutter cover
(0.59 to 0.78 N • m (6 to 8 kgf • cm)]
CBS-tite (M3x5)
To Next Page
Loading...
