Rev. A Handling and Maintenance 3-13
TM-U200 Series (Type A/AM) Technical Manual
Confidential
Using the Power Switch Cover
You can use the provided power switch cover to protect the power switch from accidental or
improper operation. Attach the cover as shown in the illustration below.
You can turn the power on or off with the switch cover attached by inserting a pointed object
(like a ball point pen) through either of the two small holes on the switch cover.
CAUTION:
If an accident occurs when the power switch cover is attached, pull the AC adapter
cord out of the outlet immediately; otherwise the printer may be damaged.
To Next Page
Loading...
Need help?
General