Related Information
& “Making Paper Source Settings to Receive Faxes (For Models with Two or More Paper Sources)” on page 114
& “Receiving Faxes Using a Connected Telephone (Remote Receive)” on page 122
& “Saving Received Faxes in the Inbox” on page 124
Receiving Faxes Using a Connected Telephone (Remote Receive)
To receive a fax manually, you need to operate the printer aer you pick up the handset of the telephone. By using
the Remote Receive feature, you can start receiving a fax just by operating the phone.
e Remote Receive feature is available for telephones that support tone dialing.
Related Information
& “Receiving Faxes Manually” on page 121
Setting Up Remote Receive
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings > Remote Receive.
3. Aer enabling Remote Receive, enter a two digit code (0 to 9, *, and # can be entered) in the Start Code eld.
4. Tap OK, and then tap OK again.
Related Information
& “Basic Settings” on page 133
Using Remote Receive
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, enter the start code using the telephone.
3.
Aer
conrming
that the printer has started receiving the fax, hang up the handset.
Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a
document from a fax information service. However, if the fax information service has an audio guidance feature
that you need to follow to receive a document, you cannot use this feature.
Note:
To receive a document from a fax information service that uses audio guidance, just dial the fax number using the connected
telephone, and operate the phone and the printer following the audio guidance.
1. Tap Fax on the home screen.
User's Guide
Faxing
122
To Next Page
Loading...
Need help?
General
