103
Related topics
Scanning with Document Capture Pro or Document Capture
Placing Originals in the Automatic Document Feeder
You can place single- or multi-page original documents in the Automatic Document Feeder (ADF). You
can also use the ADF to scan both sides of a 2-sided document. Make sure the originals meet the
Automatic Document Feeder specifications before loading them.
Caution: Do not load the following types of originals in the ADF, or they may be damaged or may
damage the scanner. Use the scanner glass for these types:
• Ripped, curled, folded, deteriorated, or wrinkled originals
• Originals with holes
• Originals containing staples or paper clips
• Originals with carbon paper backing
• Originals with labels, stickers, or sticky notes
• Originals that are bound
• Originals that are cut irregularly or not cut at a right angle
• Photos or valuable artwork
• Thermal paper
• Transparencies
• Fabric or other non-paper originals
• Originals with uneven surfaces, such as embossed documents
• Originals with wet ink
Note: When originals are placed in the ADF and on the scanner glass, priority is given to the originals in
the ADF.
Note: Do not load originals above the line under the triangle symbol on the ADF edge guide. Do not load
originals while scanning.
1. Select the icon and select How To > Place Originals > ADF.
2. Follow the on-screen instructions.
To Next Page
Loading...
Need help?
General