178
Scanning to a Memory Device
You can scan an original and save the scanned image to a external USB device connected to your
product.
1. Insert an external USB device into the product's USB port.
2. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place all of the pages in the ADF.
3. Press the home button, if necessary.
4. Select Scan.
5. Select Memory Device.
6. Select the settings as necessary.
7. Select Presets to save your scan settings.
Note: Presets can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
8. Select Save.
Your product scans your original and saves the scanned file to the connected memory device.
Parent topic: Starting a Scan Using the Product Control Panel
Related tasks
Connecting a USB Device
Related topics
Placing Originals on the Product
Scanning to the Cloud
You can use the control panel to send your scanned files to a destination that you have registered with
Epson Connect.
Note: Make sure to set up your product using Epson Connect before using this feature.
To Next Page
Loading...
Need help?
General