177
Related topics
Placing Originals on the Product
Scanning to a Connected Computer
You can scan an original and save it to a connected computer using your product's control panel. The
computer must be on the same network as the product and must have the Document Capture Pro
Server software installed. The product must also be configured for Document Capture Pro Server.
You can save the scanned file as a PDF file. You can also set up custom scan settings using Document
Capture Pro (Windows) or Document Capture (Mac) and automatically scan using those settings on your
product control panel.
1. Place your original on the product for scanning.
Note: To scan a multi-page document, place all of the pages in the ADF.
2. Press the home button, if necessary.
3. Select Scan.
4. Select Computer.
5. Select Select Computer to choose a computer to scan to, and select it when it appears.
Note: The computer you want to scan to must be on the same network as the product or connected
to the product with a USB cable.
The Select Job screen appears:
6. Select one of the scan job options.
Note: The default scan job is Scan to PDF. Any additional scan job options must be added in
Document Capture Pro (Windows) or Document Capture (Mac).
7. Select Save.
Document Capture Pro (Windows) or Document Capture (Mac) scans the original to the connected
computer.
Parent topic: Starting a Scan Using the Product Control Panel
To Next Page
Loading...
Need help?
General