279
Refer to the instructions in the paper feed roller packaging when replacing the paper feed rollers. Reset
the maintenance roller counter for the paper cassette to keep track of roller usage.
Parent topic: Replacing Ink Supply Units (Ink Packs), Maintenance Boxes, and Cassette Rollers
Related references
Product Status Messages
Related tasks
Resetting the Roller Counter on the LCD Screen
Resetting the Roller Counter on the LCD Screen
You must reset the roller counter after replacing the cassette rollers to clear the roller replacement
message and to keep track of roller usage correctly.
1. Press the home button, if necessary.
2. Select Maintenance > Pickup roller information.
3. Select Reset Counter.
4. Select the paper cassette in which you replaced the rollers, if necessary.
5. Select Yes.
6. Select Yes again to confirm the reset.
7. If you want to feed a sheet of paper to check the roller installation, select Yes. (Otherwise, select
No.)
8. If you selected Yes, you can select Run to perform a Paper Guide Cleaning cycle, or select Finish
to exit.
9. Press the home button to exit.
Parent topic: Replacing Ink Supply Units (Ink Packs), Maintenance Boxes, and Cassette Rollers
Related tasks
Replacing the Paper Feed Rollers
Cleaning the Paper Guide
Printing with Black Ink and Expended Color Ink Packs
When a color ink pack is expended, you can temporarily continue printing from your computer using
black ink. Replace the expended color ink pack as soon as possible for future printing.
Note: You cannot print with expended color ink using your product's control panel.
To Next Page
Loading...
Need help?
General