285
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the home button, if necessary.
4. Select Maintenance >Print Head Nozzle Check .
5. Select Print and press the OK button.
The nozzle pattern prints.
6. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
7. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select X.
8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don’t see any improvement after cleaning the print head up to 3 times, wait at least 12 hours
without printing. Then try cleaning the print head again. If quality still does not improve, contact Epson
support.
Parent topic: Print Head Nozzle Check
To Next Page
Loading...
Need help?
General