305
Caution: During transportation and storage, follow these guidelines:
• Because the product is heavy, two or more people should lift and carry it using the hand positions
shown here:
• When carrying the printer, avoid tilting it more than 10° or the printer may fall.
• If additional paper cassettes are installed, uninstall them before lifting the printer.
• Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
• Leave the ink packs installed. Removing the packs can dry out the print head and may prevent the
product from printing.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help
prevent the print head from drying out. Store your product in a cool, dry place.
1. Turn off the product.
2. Wait for the power light to turn off, then unplug the power cable.
3. Disconnect any connected cables or devices.
4. Remove all the paper from the product.
5. Lift up the printer cover.
6. Make sure the print head is in the home position on the right.
To Next Page
Loading...
Need help?
General