Related Information
& “Placing Originals” on page 37
& “Sending Faxes Automatically Using the Control Panel” on page 121
& “Fax Settings” on page 136
& “Checking the Status or Logs for Fax Jobs” on page 144
Sending
Dierent
Size Documents Using ADF (Continuous Scan(ADF))
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document
at their original sizes.
If you place dierent sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1. Place the rst batch of originals at the same size.
2. Select Fax on the home screen.
3. Specify the recipient.
4.
Select the Fax Settings tab, and then tap Continuous Scan(ADF) to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5. Tap
x
(Send).
6. When scanning the
rst
originals is complete and the message Scan complete. Scan the next page? is
displayed on the control panel, select Ye s , set the next originals, and then select Start Scanning.
Note:
If you leave the printer untouched for 20 seconds aer prompted to set the next originals, the printer stops storing and
starts sending the document.
Related Information
& “Placing Originals” on page 37
& “Sending Faxes Automatically Using the Control Panel” on page 121
& “Fax Settings” on page 136
Sending a Fax with a Subaddress(SUB) and Password(SID)
You can send faxes to the condential boxes or the relay boxes in the recipient's fax machine when the recipient's
fax machine has the feature to receive condential faxes or relay faxes. e recipients can receive them securely, or
can forward them to specied fax destinations.
1. Place the originals.
2. Select Fax on the home screen.
3. Select Contacts and select a recipient with a registered subaddress and password.
You can also select the recipient from Recent if it was sent with a subaddress and password.
User's Guide
Faxing
128
To Next Page
Loading...
Need help?
General