EasyManua.ls Logo

Epson Workforce Pro WF-C8610 Series - Wi-Fi Specifications; Ethernet Specifications

Epson Workforce Pro WF-C8610 Series
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functions Supported Remarks
Network Scanning Epson Scan 2 IPv4, IPv6 -
Event Manager IPv4 - -
Epson Connect (Scan to
Cloud)
IPv4 -
AirPrint (Scan) IPv4, IPv6 OS X Mavericks or
later
ADF (2-sided scanning) -
Fax Send a fax IPv4 -
Receive a fax IPv4 -
AirPrint (Faxout) IPv4, IPv6 OS X Mountain
Lion or later
Wi-Fi Specications
Standards
IEEE802.11b/g/n
*1
Frequency Range 2.4 GHz
Maximum Radio-Frequency
Power Transmitted
20 dBm (EIRP)
Coordination Modes
Infrastructure, Wi-Fi Direct (Simple AP)
*2
Wireless Securities
*3
WEP (64/128bit), WPA2-PSK (AES)
*4
, WPA2-Enterprise (AES)
*1 IEEE802.11n is only available for the HT20.
*2 Not supported for IEEE 802.11b.
*3 Wi-Fi Direct supports WPA2-PSK (AES) only.
*4 Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specications
Standards
IEEE802.3i (10BASE-T)
*1
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
*1
IEEE802.3az (Energy Ecient Ethernet)
*2
Communication Mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps
Half duplex
Connector RJ-45
*1 Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
User's Guide
Appendix
230

Table of Contents

Related product manuals