EasyManuals Logo

Epson Workforce Pro WF-C8610 Series User Manual

Epson Workforce Pro WF-C8610 Series
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
c
Important:
Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.
5. Shake the ink cartridge horizontally for 5 seconds. (Move it back and forth about 10 cm 15 times.)
6. Insert the cartridge into the printer until it clicks.
7. Close the front cover.
Related Information
&
“Ink Cartridge Handling Precautions” on page 155
Maintenance Box Code
Epson recommends the use of a genuine Epson maintenance box.
Maintenance box code: T6714
c
Important:
Once a maintenance box has been installed in a printer it cannot be used with other printers.
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
Do not remove the lm on the top of the box; otherwise ink may leak.
Do not tilt the used maintenance box until
aer
it is sealed in the plastic bag; otherwise ink may leak.
Keep the maintenance box out of direct sunlight.
User's Guide
Replacing Ink Cartridges and Other Consumables
158

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Workforce Pro WF-C8610 Series and is the answer not in the manual?

Epson Workforce Pro WF-C8610 Series Specifications

General IconGeneral
BrandEpson
ModelWorkforce Pro WF-C8610 Series
CategoryPrinter
LanguageEnglish

Related product manuals