& “Loading Paper in the Rear Paper Feed” on page 33
Several Sheets of Paper are Fed at a Time
When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.
Paper Does Not Feed from the Optional Paper Cassette Units
If you have added optional paper cassette units, you need to make settings in the printer driver.
Related Information
&
“Setting the Optional Paper Cassette Unit in the Printer Driver - Windows” on page 245
&
“Setting the Optional Paper Cassette Unit in the Printer Driver - Mac OS” on page 246
Paper Does Not Feed Correctly After Replacing the Maintenance
Rollers
e
maintenance rollers may not have been replaced correctly. Check if they have been installed correctly.
Paper Out Error Occurs
When a paper out error occurs although paper is loaded in the rear paper feed, reload paper in the center of the
rear paper feed.
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
User's Guide
Solving Problems
198
To Next Page
Loading...
Need help?
General