Epson Workforce Pro WF-C8610 Series - Placing Originals on the Scanner Glass

Related Information
& “Available Originals for the ADF” on page 38
Placing Originals on the ADF for 2-up Copying
Place the originals in the direction shown in the illustration, and then select the orientation setting.
❏ Placing the originals in the up direction: Select Up Direction on the control panel as described below.
Copy > Advanced > Orientation (Original) > Up Direction
Place the originals on the ADF in the direction of the arrow.
❏ Placing the originals in the le direction: Select Le Direction on the control panel as described below.
Copy > Advanced > Orientation (Original) >
Le
Direction
Place the originals on the ADF in the direction of the arrow.
Placing Originals on the Scanner Glass
!
Caution:
Be careful not to trap your ngers when closing the document cover. Otherwise you may be injured.
c
Important:
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
User's Guide
Preparing the Printer
41