Moving and Transporting the Printer
!
Caution:
❏ When carrying the printer,
li
it using a stable position.
Liing
the printer using an unstable position may result
in injury.
❏ Because this printer is heavy, it should always be carried by two or more people when unpacking and
transporting.
❏ When
liing
the printer, place your hands in the positions shown below. If you
li
the printer holding other
positions, the printer may fall or you may trap your
ngers
when placing the printer.
❏ When carrying the printer, do not tilt it more than 10 degrees; otherwise the printer may fall.
❏ When installing the printer on the optional cabinet, lock the casters before starting installation. If the cabinet
moves unexpectedly, you may be injured.
Preparing to Move the Printer
1. Turn o the printer by pressing the
P
button.
2. Make sure the power light turns o, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is
o.
Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. If the printer supports external storage devices, make sure they are not connected.
User's Guide
Appendix
248