Loading Paper in the Rear Paper Feed
1. Open the feeder guard and pull out the paper support.
2. Slide the edge guides.
3. Load paper at the center of the rear paper feed with the printable side facing up.
c
Important:
❏ Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load
above the line just under the triangle symbol inside the edge guide.
❏ Load paper short edge rst. However, when you have set the long edge as the width of the user dened size,
load paper long edge rst.
User's Guide
Preparing the Printer
33
To Next Page
Loading...
Need help?
General