Pre-punched paper
Note:
❏ Load a single sheet of dened size plain paper with binding holes at the le or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
4. Slide the edge guides to the edges of the paper.
5. On the control panel, set the size and type of the paper you loaded in the rear paper feed.
Note:
❏ You can also display the paper size and paper type settings screen by pressing the
button on the control panel.
❏ Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 30
& “Available Paper and Capacities” on page 26
& “List of Paper Type” on page 36
& “Loading Envelopes and Precautions” on page 35
& “Loading long papers and Precautions” on page 36
User's Guide
Preparing the Printer
34
To Next Page
Loading...
Need help?
General