Glossary
2
HF-cable no. 20192-082 or 20192-126
Cable for conducting the high frequency current from the ICC generator
to the APC 300.
Information line
A line in the standard display. Here, plain language error messages and
warnings are shown.
Instrument identification facility
For assigning an instrument to a particular Instrument number by means of a
coding. With the aid of the instrument identification facility, the APC 300
automatically sets the COAG flow, CUT flow, rinse flow and rinse duration
for each instrument.
Instrument Number
Memory location e.g. 1, where COAG flow, CUT flow, rinse flow and rinse
duration of an instrument are stored.
Instrument rinse parameters
Rinse duration and rinse flow rate.
Ionization
Removal or addition of an electron from or to an atom or molecule. The
electrically charged atoms or molecules thus formed are known as ions. Ions
can, like electrons, conduct electrical charges.
Menu
For example a list of programs from among which the user can make a
selection.
Overdose
The actual COAG flow, CUT flow rate is greater than the flow rate that was set.
Plasma channel
Ionized path within the argon cloud, through which the HF-current flows
between the active electrode and the surface of the tissue.
Pressure pipe
Connection between argon cylinder and cylinder connections.
To Next Page
Loading...
