34
8 • Actuation Configurations for ACC 450
Position neutral electrode on the patient. Connect the neutral electrode
to the ACC 450.
of equipment trolley.
ACC 450 and APC 300.
1. Open the cylinder valves on the argon gas cylinders in a clockwise direction
until they stop.
2. Check fill level of the argon cylinders (fill level of the argon cylinders is
in the information line of the standard display). Always keep a full
replacement cylinder at the ready.
1. Set Coagulation field to SPRAY 2.
2. Select the desired intensity.
3. Do not activate P
EDAL key in Autocoagulation field. Imperative!
WARNING!
3. Connect neutral electrode
4. Plug in mains plug
5. Switch on
6. Open cylinder valves
7. Set ACC for APC
To Next Page
Loading...
