35
Actuation Configurations for ACC 450 • 8
APC probe for flexible endoscopes, consisting of: cable and probe
1. Screw the bacteriological filter
to the argon socket.
2. Screw the cable's argon connection
to the filter.
3. Plug the cable's multiple plug into the multiple socket .
4. Connect the cable to the APC probe.
Is the automatic setting of the Coag flow suitable for the application?
Press P
UR key and rinse the probe with argon.
Carry out functional test as described in CHAPTER 3 à.
Press the blue pedal.
Introduce the sterile APC probe into the work channel of the endoscope.
8. Connect APC probe
10. Rinse probe
9. Check flow
11. Functional test
12. Actuate APC
13. Introduce probe into the
endoscope
To Next Page
Loading...
